Screw Conveyor has become one of the important equipment in the entire production chain. Advanced structure, strong adaptability, low resistance, long life, easy maintenance, protection devices is a significant feature of the screw conveyor. Before running the screw conveyor, first make sure the screw conveyor equipment, personnel, goods are transported in safe state intact; Second, check all moving parts of the normal no foreign body, check all electrical wiring is normal, normal to the conveyor belt put into operation. Finally, check the difference between the supply voltage and the rated voltage does not exceed ± 5%. Run into the screw conveyor, you must do the following: 1. Close the main power switch, power is fed properly inspect equipment and power indicator light. The next step is normal. 2. Closing the power switch of each circuit, to check whether it is normal. Under normal conditions are: power indicator device does not operate, the conveyor belt running lights are not bright, bright inverter and other equipment, the inverter display panel shows the normal (no fault code display). 3. In accordance with the process in order to start all electrical equipment, electrical equipment on the back of a normal start (motor or other device has reached the normal speed, the normal state) and then the next one to start electrical equipment. In the screw conveyor operation, must comply with the provisions of articles designed to be transported in goods, to comply with screw conveyor design capability. Secondly, we must pay attention to all kinds of people can not touch the moving parts of the conveyor belt, non-professionals are not free to contact with electrical components, control buttons, etc. http://www.btsanrong.com/